Thin backgrounds

Very thin backgrounds

These panels, made of small ceramic rocks fused to a very inert plastic base, are to be vertically installed against the back of the aquarium.


They can be used on their own or together with ceramic rocks as a free standing arrangement, whose caves and shelters make the general view very natural and homogeneous.

Neutrality and use

Excellent neutrality of all the materials, even after cutting (with a carbide saw) or shaping.

You can use them as they are, as complete backgrounds, or cut and shaped to make holes.

2 solutions for the setting up : panels can be glued with silicone rubber (permanent) or wedged under the upper strengthening piece.

Then build a central decor with our ceramic rocks and plates.

Complete backgrounds

Use rectangular panels.

  • For a 120 cm aquarium : use 3 panels – width 39 cm. These panels exists in 3 heights : 45 cm, 55 cm and 66 cm.
  • For a 150 cm aquarium, height 55 cm : use 3 panels -39 cm and 1 panel – 31 cm .

Partial backgrounds with cliff effect

Use rifts and 1 panel (39 cm) , put a dark paper background behind your aquarium for a depth effect.

  • Aquarium 100 or 120 cm : 1 panel 39 cm, 1 right rift an 1 left rift. This solution is both aesthetic and easy as it avoids cutting the panels.

 

Special shapes

To hide filtrations, leave passages for tubes… Use a carbide saw.(diamond disc)

Consider making holes for water outlets : Heat carefully and remove debris with a screw -driver (take care, dangerous)

Rift / left Dimensions
(cm)
Weight
(kg)
Product
Code
[Gencod]
Notes
Neutral, for fresh and marine water
shape with clift effect: rectangular on left side and irregular on the other
can be cut with a diamond disc saw
H:45 L:15 à 25 4501 [3594983045013]
H:55 L:15 à 25 5501 [3594983055012]
H:66 L:15 à 25 6601 [3594983066018]
Rift / right Dimensions
(cm)
Weight
(kg)
Product
Code
[Gencod]
Notes
Neutral, for fresh and marine water
rectangular on the right side and irregular on the other, to create a cliff effect
can be cut with a diamond disc saw
H:45 L:15 to 25 4502 [3594983045020]
H:55 L:15 to 25 5502 [3594983055029]
H:66 L:15 to 25 6602 [3594983066025]
Thin backgrounds Dimensions
(cm)
Weight
(kg)
Product
Code
[Gencod]
Notes
Neutral, for fresh and marine water
to put against the rear pane of glass or on weir sides.
rectangular shape.
Can be cut with a diamond disc saw
H:45 L:19 4519 [3594983045198]
H:45 L:39 4539 [3594983045396]
H:55 L:19 5519 [3594983055197]
H:55 L:31 5531 [3594983055319]
H:55 L:39 5539 [3594983055395]
H:66 L:39 6639 [3594983066391]
H:66 L:19 6619 [3594983066193]